Panasonic PT-CW230EA – WXGA (1280 x 800) 2500 ANSI Ultra Short-Throw

$1,550.00

Compare
SKU: 81 Category:

Description

This new Extreme Short Throw projector is principally designed to be wall mounted above an interactive whiteboard, the projector is equally suited to desktop or floor projection, providing large crisp images from extreme short throw distances. 

Wall mounted above the projection surface, the PT-CW230EA requires one of the smallest gaps between the top of the board and the bottom of the projector, making the unit suitable for the widest range of classroom environments, even where ceiling height is limited. 

The  PT-CW230EA 0 provides 2500 ANSI, native WXGA resolution, although can be switched to a 4:3 aspect to provide compatibility with current board installations. Wide ranging connectivity options including HDMI, two VGA terminals (one switchable for monitor re-drive) as well as composite and s-video. 

An integrated 10 watt speaker provides sufficient audio for the classroom environment, while network monitoring and control with e-mail alert, enables the projector to be managed remotely across the network to resolve either operator issues or to remotely switch the projector into standby mode at the end of the day. 

Excitingly, the  PT-CW230EA  is also 3D compatible. With Education applications forecast to be one of the strongest growth areas for 3D, this not only enables end users to “Future Proof” their purchase, but also offers the opportunity for a truly immersive teaching experience.In an educational setting, an instructor can show a presentation on the blackboard by simply setting up the projector on an instructor’s desk at the front of the classroom.In ceiling-mount situations, the projector can be installed closer to the screen to avoid light shining in the eyes of the presenter. 
Key Features

  • 2500 ansi as standard, circa 2100 in eco 
  • At 0.19:1 it is the shortest throw in the world 
  • 3D enabled for future proofing 
  • HDMI input 
  • Long life filter due to it being a thicker mesh allowing air flow but less particles can get through, up to a 4000 hour filter 
  • 10 watt internal speaker 
  • Network ( monitoring and control ) 
  • Keystone Correction to 5 degrees 
  • Digital zoom 
  • 3 year De/RE and 3 year lamp warranty

Product Specs

Model PT-CW230  
Power supply 100 – 240 V AC, 50/60 Hz
Power consumption 350 W (0.45 W when STANDBY MODE set to ECO,*1
11.0 W when STANDBY MODE set to NETWORK.)
DLP™ chip Panel size 16.5 mm (0.65 inches) diagonal 
(16:10 aspect ratio)
 
Display method DLP™ chip x 1 DLP™ system
Pixels 1,024,000 (1,280 x 800) pixels  
Lens Fixed (0.19:1 throw ratio), 
manual focus F = 2.5, f = 4.83 mm
 
Lamp 275 W UHM lamp (The lamp replacement cycle is 3,000 hours*2)
Screen size (diagonal) 1.52-2.79 m (60-110 inches) 
(16:10 aspect ratio)
 
Color reproducibility Full color (16,777,216 colors)
Brightness*3 2,500 lm (lamp power: Normal)  
Center-to-corner uniformity*3 80%
Contrast*3 2,000:1 (full on/off, lamp power: Normal)
Resolution 1,280 x 800 pixels
(Input signals that exceed this resolution 
will be converted to 1,280 x 800 pixels.)
 
Scanning
frequency
HDMI (Horizontal) 15-93 kHz; (Vertical) 50-120 Hz; (Dot clock) 150 MHz or lower
RGB (analog) (Horizontal) 15-93 kHz; (Vertical) 50-120 Hz; (Dot clock) 150 MHz or lower 
(Signals exceeding the dot clock rate of 150 MHz are downsampled.)
YPBPR (YCBCR) fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
 
Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Keystone correction range Vertical: ±5°
Installation Ceiling/floor, front/rear (Menu setting)
Built-in speaker 3.7 cm round shape x 1, output power 10 W (monaural)
Terminals HDMI IN HDMI 19-pin x 1(compatible with HDCP) 
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
COMPUTER IN 1 D-sub HD 15-pin (female) x 1 [RGB/YPB(CB)/PR(CR)x 1]
COMPUTER IN 2 / MONITOR OUT D-sub HD 15-pin (female) x 1 (RGB x 1) (input/output selectable using on-screen Menu) 
(When Monitor Out is selected, the COMPUTER IN 1 signal is output.)
VIDEO IN RCA pin x 1
S-VIDEO IN Mini DIN 4-pin x 1
COMPUTER 1 AUDIO IN M3 x 1 (L-R x 1)
COMPUTER 2 AUDIO IN M3 x 1 (L-R x 1)
AUDIO IN RCA pin x 2 (L/R x 1) for VIDEO/S-VIDEO input
AUDIO OUT M3 x 1 (L-R x 1) for output (variable)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
LAN RJ-45 x 1 (for network connection, 100BASE-TX/10BASE-T, 
compliant with PJLink™ (class 1))
3D SYNC OUT Mini DIN 3-pin x 1 (for 3D transmitter connection)
Power cord length 3.0 m (9’10”)
Cabinet materials Molded plastic
Dimensions (W x H x D) 321 x 178 x 386 mm (12-5/8″ x 7″ x 15-3/16″)
(with legs at shortest position)
Weight Approximately 6.2 kg (13.7 lbs)*4
Noise level 36 dB (Lamp power: Normal); 28 dB (Lamp power: Eco)
Operating temperature 0°C-40°C [32°F-104°F] (Less than 1,000 m [3,281 ft] above sea level) 
0°C-30°C [32°F-86°F] (between 1,000 and 2,700 m [3,281 ft and 8,858 ft] above sea level)
Operating humidity 20%-80% (no condensation)
Supplied accessories Power cord x 1( x 2 for PT-CW230EA, PT-CX200EA), power cord cover x 1, 
wireless remote control unit x 1, batteries (AAA/R03/LR03 type x 2), 
computer cable (1.8 m, for VGA) x 1

Reviews

There are no reviews yet.

Be the first to review “Panasonic PT-CW230EA – WXGA (1280 x 800) 2500 ANSI Ultra Short-Throw”

We are Conducting Stocktake

Please email us at: sales@audiovisualsales.com.au