HS120P 1 x 120W USB/RS232 Control with mini DSP Power Amplifier
1 x 120W Power Amplifier
USB/RS232 Control w mini DSP
• 1 x 120W amplifier
• 4 ohm, 70V and 100V output options
• Class D topology
• Programmable via PC UI application
• USB and RS232 control
• Mini DSP – Volumes Controls, Input / output routing, High and low shelf filtering, Compressor / limiter, Filtering, Pink noise / sine wave generator, Mutes, Inversion
• Mute control via contact
• Standby control via contact
• Fault status via contact
| Output Power per Channel | 120W | Frequency Response | 100Hz – 16kHz |
| Output Channels | 1 | THD+N | < 0.2% (-3dB) |
| Output Mode | 4 Ohm-70V-100V | Signal to Noise Ratio | > 94dB |
| Input Voltage | 220-240Vac 50-60Hz | Input Sensitivity | 1Vrms |
| Mounting | 1RU | Cooling | Convection |
| Warranty | 5 years |
| Product Dimensions (W x D x H) | 483mm x 325mm x 44.5mm | Shipping Dimensions (W x D x H) | 525mm x 425mm x 120mm |
| Net Weight | 5.0 Kg | Shipping Weight | 8.0 Kg |
| GTIN EAN | 9323383019904 |
Blue Slow Flash = Standby Mode (On for 50ms, Off for 4s) Blue Flashing = Error Mode (LED Off for 2s followed by a flash count of the error code). Refer to the Fault Finding section of this manual to fix any errors displayed.
Yellow On = Amplifier temperature hot
Red Flashing = Amplifier over temperature
Red On = Amplifier protect
CLASS-D AMPLIFIER
The HSP amplifiers use an efficient Class-D amplifier topology allowing a greater power density with a much lower weight.
All amplifier channels offer 100V, 70V and 4Ω output options so you can choose the output configuration to match your application.
INTEGRATED MINI DSP
The HSP amplifiers include a mini DSP engine with the following features,
• Input/Output Router
• High, Low Pass Filters
• Compressor/limiter
• Mute
• Inversion
PC CONTROL APPLICATION
Take control of your amplifier using the HSP Control Software.
The control software allows you to modify signal routing, DSP settings, channel naming, retrieve status information and more.
Download it now from the download section of this page and see what the HSP amplifier can do.
3RD PARTY CONTROL
Take control of your amplifier using the HSP Control Software.
The control software allows you to modify signal routing, DSP settings, channel naming, retrieve status information and more.
Download it now from the download section of this page and see what the HSP amplifier can do.
HS250P 1 x 250W USB/RS232 Control with mini DSP Power Amplifier
1 x 250W Power Amplifier
USB/RS232 Control w mini DSP
• 4 ohm, 70V and 100V output options
• Class D topology
• Programmable via PC UI application
• USB and RS232 control
• Mini DSP – Volumes Controls, Input / output routing, High and low shelf filtering, Compressor / limiter, Filtering, Pink noise / sine wave generator, Mutes, Inversion
• Mute control via contact
• Standby control via contact
• Fault status via contact
| Output Power per Channel | 250W | Frequency Response | 100Hz – 16kHz |
| Output Channels | 1 | THD+N | < 0.2% (-3dB) |
| Output Mode | 4 Ohm-70V-100V | Signal to Noise Ratio | > 96dB |
| Input Voltage | 100-240Vac 50-60Hz | Input Sensitivity | 1Vrms |
| Mounting | 1RU | Cooling | Fan-assisted |
| Warranty | 5 years |
| Product Dimensions (W x D x H) | 483mm x 325mm x 44.5mm | Shipping Dimensions (W x D x H) | 525mm x 425mm x 120mm |
| Net Weight | 6.4 Kg | Shipping Weight | 9.0 Kg |
| GTIN EAN | 9323383019911 |
Blue Slow Flash = Standby Mode (On for 50ms, Off for 4s) Blue Flashing = Error Mode (LED Off for 2s followed by a flash count of the error code). Refer to the Fault Finding section of this manual to fix any errors displayed.
Yellow On = Amplifier temperature hot
Red Flashing = Amplifier over temperature
Red On = Amplifier protect
CLASS-D AMPLIFIER
The HSP amplifiers use an efficient Class-D amplifier topology allowing a greater power density with a much lower weight.
All amplifier channels offer 100V, 70V and 4Ω output options so you can choose the output configuration to match your application.
INTEGRATED MINI DSP
The HSP amplifiers include a mini DSP engine with the following features,
• Input/Output Router
• High, Low Pass Filters
• Compressor/limiter
• Mute
• Inversion
PC CONTROL APPLICATION
Take control of your amplifier using the HSP Control Software.
The control software allows you to modify signal routing, DSP settings, channel naming, retrieve status information and more.
Download it now from the download section of this page and see what the HSP amplifier can do.
3RD PARTY CONTROL
Take control of your amplifier using the HSP Control Software.
The control software allows you to modify signal routing, DSP settings, channel naming, retrieve status information and more.
Download it now from the download section of this page and see what the HSP amplifier can do.
HS2120P 2 x 120W USB/RS232 Control Power Amplifier
2 x 120W Power Amplifier
USB/RS232 Control w mini DSP
• 2 x 120W amplifier
• 4 ohm, 70V and 100V output options
• Class D topology
• Programmable via PC UI application
• USB and RS232 control
• Mini DSP – Volumes Controls, Input / output routing, High and low shelf filtering, Compressor / limiter, Filtering, Pink noise / sine wave generator, Mutes, Inversion
• Mute control via contact
• Standby control via contact
• Fault status via contact
| Output Power per Channel | 120W | Frequency Response | 100Hz – 16kHz |
| Output Channels | 2 | THD+N | < 0.2% (-3dB) |
| Output Mode | 4 Ohm-70V-100V | Signal to Noise Ratio | > 96dB |
| Input Voltage | 100-240Vac 50-60Hz | Input Sensitivity | 1Vrms |
| Mounting | 1RU | Cooling | Fan-assisted |
| Warranty | 5 years |
| Product Dimensions (W x D x H) | 483mm x 325mm x 44.5mm | Shipping Dimensions (W x D x H) | 525mm x 425mm x 120mm |
| Net Weight | 7.2 Kg | Shipping Weight | 9.8 Kg |
| GTIN EAN | 9323383019928 |
Blue Slow Flash = Standby Mode (On for 50ms, Off for 4s) Blue Flashing = Error Mode (LED Off for 2s followed by a flash count of the error code). Refer to the Fault Finding section of this manual to fix any errors displayed.
Yellow On = Amplifier temperature hot
Red Flashing = Amplifier over temperature
Red On = Amplifier protect
CLASS-D AMPLIFIER
The HSP amplifiers use an efficient Class-D amplifier topology allowing a greater power density with a much lower weight.
All amplifier channels offer 100V, 70V and 4Ω output options so you can choose the output configuration to match your application.
INTEGRATED MINI DSP
The HSP amplifiers include a mini DSP engine with the following features,
• Input/Output Router
• High, Low Pass Filters
• Compressor/limiter
• Mute
• Inversion
PC CONTROL APPLICATION
Take control of your amplifier using the HSP Control Software.
The control software allows you to modify signal routing, DSP settings, channel naming, retrieve status information and more.
Download it now from the download section of this page and see what the HSP amplifier can do.
3RD PARTY CONTROL
Take control of your amplifier using the HSP Control Software.
The control software allows you to modify signal routing, DSP settings, channel naming, retrieve status information and more.
Download it now from the download section of this page and see what the HSP amplifier can do.
HS4250P 4 x 250W USB/RS232 Control w mini DSP Power Amplifier
4 x 250W Power Amplifier
USB/RS232 Control w mini DSP
• 2 x 250W power amplifier
• 4 ohm, 70V and 100V output options
• Class D topology
• Programmable via PC UI application
• USB and RS232 control
• Mini DSP – Volumes Controls, Input / output routing, High and low shelf filtering, Compressor / limiter, Filtering, Pink noise / sine wave generator, Mutes, Inversion
• Mute control via contact
• Standby control via contact
• Fault status via contact
| Output Power per Channel | 250W | Frequency Response | 100Hz – 16kHz |
| Output Channels | 2 | THD+N | < 0.2% (-3dB) |
| Output Mode | 4 Ohm-70V-100V | Signal to Noise Ratio | > 97dB |
| Input Voltage | 100-240Vac 50-60Hz | Input Sensitivity | 1Vrms |
| Mounting | 1RU | Cooling | Fan-assisted |
| Warranty | 5 years |
| Product Dimensions (W x D x H) | 483mm x 325mm x 44.5mm | Shipping Dimensions (W x D x H) | 525mm x 425mm x 120mm |
| Net Weight | 9.0 Kg | Shipping Weight | 11.2 Kg |
| GTIN EAN | 9323383019935 |
Blue Slow Flash = Standby Mode (On for 50ms, Off for 4s) Blue Flashing = Error Mode (LED Off for 2s followed by a flash count of the error code). Refer to the Fault Finding section of this manual to fix any errors displayed.
Yellow On = Amplifier temperature hot
Red Flashing = Amplifier over temperature
Red On = Amplifier protect
CLASS-D AMPLIFIER
The HSP amplifiers use an efficient Class-D amplifier topology allowing a greater power density with a much lower weight.
All amplifier channels offer 100V, 70V and 4Ω output options so you can choose the output configuration to match your application.
INTEGRATED MINI DSP
The HSP amplifiers include a mini DSP engine with the following features,
• Input/Output Router
• High, Low Pass Filters
• Compressor/limiter
• Mute
• Inversion
PC CONTROL APPLICATION
Take control of your amplifier using the HSP Control Software.
The control software allows you to modify signal routing, DSP settings, channel naming, retrieve status information and more.
Download it now from the download section of this page and see what the HSP amplifier can do.
3RD PARTY CONTROL
Take control of your amplifier using the HSP Control Software.
The control software allows you to modify signal routing, DSP settings, channel naming, retrieve status information and more.
Download it now from the download section of this page and see what the HSP amplifier can do.
HS4250P 4 x 250W USB/RS232 Control w mini DSP Power Amplifier
4 x 250W Power Amplifier
USB/RS232 Control w mini DSP
• 4 x 250W power amplifier
• 4 ohm, 70V and 100V output options
• Class D topology
• Programmable via PC UI application
• USB and RS232 control
• Mini DSP – Volumes Controls, Input / output routing, High and low shelf filtering, Compressor / limiter, Filtering, Pink noise / sine wave generator, Mutes, Inversion
• Mute control via contact
• Standby control via contact
• Fault status via contact
| Output Power per Channel | 250W | Frequency Response | 100Hz – 16kHz |
| Output Channels | 4 | THD+N | < 0.25% (-3dB) |
| Output Mode | 4 Ohm-70V-100V | Signal to Noise Ratio | > 91dB |
| Input Voltage | 100-240Vac 50-60Hz | Input Sensitivity | 1Vrms |
| Mounting | 2RU | Cooling | Fan-assisted |
| Warranty | 5 years |
| Product Dimensions (W x D x H) | 483mm x 389mm x 89mm | Shipping Dimensions (W x D x H) | 546mm x 491mm x 197mm |
| Net Weight | 16.0 Kg | Shipping Weight | 18.6 Kg |
| GTIN EAN | 9323383019959 |
Blue Slow Flash = Standby Mode (On for 50ms, Off for 4s) Blue Flashing = Error Mode (LED Off for 2s followed by a flash count of the error code). Refer to the Fault Finding section of this manual to fix any errors displayed.
Yellow On = Amplifier temperature hot
Red Flashing = Amplifier over temperature
Red On = Amplifier protect
CLASS-D AMPLIFIER
The HSP amplifiers use an efficient Class-D amplifier topology allowing a greater power density with a much lower weight.
All amplifier channels offer 100V, 70V and 4Ω output options so you can choose the output configuration to match your application.
INTEGRATED MINI DSP
The HSP amplifiers include a mini DSP engine with the following features,
• Input/Output Router
• High, Low Pass Filters
• Compressor/limiter
• Mute
• Inversion
PC CONTROL APPLICATION
Take control of your amplifier using the HSP Control Software.
The control software allows you to modify signal routing, DSP settings, channel naming, retrieve status information and more.
Download it now from the download section of this page and see what the HSP amplifier can do.
3RD PARTY CONTROL
Take control of your amplifier using the HSP Control Software.
The control software allows you to modify signal routing, DSP settings, channel naming, retrieve status information and more.
Download it now from the download section of this page and see what the HSP amplifier can do.
4 x 120W Power Amplifier USB/RS232 Control w mini DSP
4 x 120W Power Amplifier
USB/RS232 Control w mini DSP
• 4 x 120W power amplifier
• 4 ohm, 70V and 100V output options
• Class D topology
• Programmable via PC UI application
• USB and RS232 control
• Mini DSP – Volumes Controls, Input / output routing, High and low shelf filtering, Compressor / limiter, Filtering, Pink noise / sine wave generator, Mutes, Inversion
• Mute control via contact
• Standby control via contact
• Fault status via contact
| Output Power per Channel | 120W | Frequency Response | 100Hz – 16kHz |
| Output Channels | 4 | THD+N | < 0.2% (-3dB) |
| Output Mode | 4 Ohm-70V-100V | Signal to Noise Ratio | > 92dB |
| Input Voltage | 100-240Vac 50-60Hz | Input Sensitivity | 1Vrms |
| Mounting | 2RU | Cooling | Fan-assisted |
| Warranty | 5 years |
| Product Dimensions (W x D x H) | 483mm x 389mm x 89mm | Shipping Dimensions (W x D x H) | 546mm x 491mm x 197mm |
| Net Weight | 14.0 Kg | Shipping Weight | 15.6 Kg |
| GTIN EAN | 9323383019942 |
Blue Slow Flash = Standby Mode (On for 50ms, Off for 4s) Blue Flashing = Error Mode (LED Off for 2s followed by a flash count of the error code). Refer to the Fault Finding section of this manual to fix any errors displayed.
Yellow On = Amplifier temperature hot
Red Flashing = Amplifier over temperature
Red On = Amplifier protect
CLASS-D AMPLIFIER
The HSP amplifiers use an efficient Class-D amplifier topology allowing a greater power density with a much lower weight.
All amplifier channels offer 100V, 70V and 4Ω output options so you can choose the output configuration to match your application.
INTEGRATED MINI DSP
The HSP amplifiers include a mini DSP engine with the following features,
• Input/Output Router
• High, Low Pass Filters
• Compressor/limiter
• Mute
• Inversion
PC CONTROL APPLICATION
Take control of your amplifier using the HSP Control Software.
The control software allows you to modify signal routing, DSP settings, channel naming, retrieve status information and more.
Download it now from the download section of this page and see what the HSP amplifier can do.
3RD PARTY CONTROL
Take control of your amplifier using the HSP Control Software.
The control software allows you to modify signal routing, DSP settings, channel naming, retrieve status information and more.
Download it now from the download section of this page and see what the HSP amplifier can do.
ANALOGUE4 4 Line Level Inputs Analogue Expansion Card
Analogue Expansion Card
4 Line Level Inputs
• 4 Line Level Inputs
• Simple install using a ribbon cable
• 15dB software configured attenuation pad
• Compatible with IS2120P, IS2250P, IS4120P, IS4250P
| Output Power per Channel | N/A | Frequency Response | N/A |
| Output Channels | N/A | THD+N | N/A |
| Output Mode | N/A | Signal to Noise Ratio | N/A |
| Input Voltage | N/A | Input Sensitivity | N/A |
| Mounting | N/A | Cooling | N/A |
| Warranty | 5 years |
| Product Dimensions (W x D x H) | Shipping Dimensions (W x D x H) | ||
| Net Weight | Shipping Weight | ||
| GTIN EAN | 9323383020023 |
EASY INSTALLATION
The ANALOGUE4 module is very simply installed into a compatible product.
Simply remove the rear expansion slot blanking plate, connect the internal ribbon cable to the module and attach the two mounting screws.
ANALOGUE4 MODULE
The ISP amplifiers can expand their analogue inputs for greater mixing possibilities using the ANALOGUE4 Module.
This provides an additional 4 analogue audio inputs to the ISP for expanded mixing possibilities.
DM4X4 Dante® With 4 Input and Output Expansion Card
Dante® Expansion Card
4 Input, 4 Output
• 4 Output Channels
• AES67 Support
• Simple expansion slot install using a ribbon cable
• Dante® network setup is performed using the Dante® Controller software from Audinate.
• Compatible with IS2120P, IS2250P, IS4120P, IS4250P
| Output Power per Channel | N/A | Frequency Response | N/A |
| Output Channels | N/A | THD+N | N/A |
| Output Mode | N/A | Signal to Noise Ratio | N/A |
| Input Voltage | N/A | Input Sensitivity | N/A |
| Mounting | N/A | Cooling | N/A |
| Warranty | 5 years |
| Product Dimensions (W x D x H) | Shipping Dimensions (W x D x H) | ||
| Net Weight | Shipping Weight | ||
| GTIN EAN | 9323383020016 |
EASY INSTALLATION
The DM4x4 module is very simply installed into a compatible product.
Simply remove the rear expansion slot blanking plate, connect the internal ribbon cable to the module and attach the two mounting screws.
DM4X4 MODULE
The DM4x4 provides 4 Dante
Input channels and 4 output channels.
DANTE OUTPUT CHANNELS
DANTE® CONTROLLER
Configure the Dante® network using the Dante® Controller software from Audinate.
Simply connect the DM4x4 module to the network and it will appear on the Dante® controller under available devices.
Using the controller software connect the ISP amplifier inputs and outputs to other available devices on the Dante® network.
AMB600 2 x 300W Rugged Low Impedance Power Amplifier
2 x 300W Power Amplifier
Rugged Low Impedance Amplifier
• 600W power amplifier
• 4 Ohm / 8 Ohm Operation
• Mono, Stereo or Bridge Mode operation
• Class AB operation
• Balanced XLR input and thru output
• 2 RU
• Fan cooled
| Output Power per Channel | 300W | Frequency Response | 20Hz – 20kHz |
| Output Channels | 2 | THD+N | < 0.06% (-3dB) |
| Output Mode | 4 Ohm-8 Ohm | Signal to Noise Ratio | > 100dB |
| Input Voltage | 230Vac 50-60Hz | Input Sensitivity | 1.23Vrms (+4dBu) |
| Mounting | 2RU | Cooling | Fan-assisted |
| Warranty | 5 years |
| Product Dimensions (W x D x H) | 483mm x 366mm x 88mm | Shipping Dimensions (W x D x H) | 530mm x 465mm x 188mm |
| Net Weight | 10.85 Kg | Shipping Weight | 13.3 Kg |
| GTIN EAN | 9323383014565 |
AMB1200 2 x 600W Rugged Low Impedance Power Amplifier
2 x 600W Power Amplifier
Rugged Low Impedance Amplifier
• 4 Ohm / 8 Ohm Operation
• Mono, Stereo or Bridge Mode operation
• Class AB operation
• Balanced XLR input and thru output
• 2 RU
• Fan cooled
| Output Power per Channel | 600W | Frequency Response | 20Hz – 20kHz |
| Output Channels | 2 | THD+N | < 0.06% (-3dB) |
| Output Mode | 4 Ohm-8 Ohm | Signal to Noise Ratio | > 100dB |
| Input Voltage | 230Vac 50-60Hz | Input Sensitivity | 1.23Vrms (+4dBu) |
| Mounting | 2RU | Cooling | Fan-assisted |
| Warranty | 5 years |
| Product Dimensions (W x D x H) | 483mm x 366mm x 88mm | Shipping Dimensions (W x D x H) | 530mm x 465mm x 188mm |
| Net Weight | 13.9 Kg | Shipping Weight | 16.5 Kg |
| GTIN EAN | 9323383014541 |