Description
Mipro AT-100 Circular Polarized Antenna
AT-100 is designed for demanding professional stages and will greatly improve signal stability and reduce interferences, signal drop-outs caused by polarization problems. It is an active directional antenna.
Features
- Distinguished Appearance Optimized solution for both transmitting and receiving RF signals throughout the UHF bandwidth.
- Patented in multiple countries.
Main Features
- Circularly polarized antenna can effectively reduce the polarization loss of the antenna to improve signals strength. Optimum solution for 470-1,000 MHz bandwidth with 6~8 dBi antenna gain and certified to latest CE/FCC newly telecom regulations.
- Front area is the main focus of antenna direction for either vertical or horizontal polarization.
Built-in Connectors
- AT-100 has two built-in connectors: One “TX/RX” signal connectors for either transmitter or receiver. Another “RX Only” receiver only connector (cannot connect to transmitter) has a built-in 12 dB antenna gain booster provides extended reception range and compensates for coaxial cable signal loss caused to improve reception range and signal quality. Booster power can be provided by a MIPRO AD-707a or any ACT series receivers.
Results
- AT-100 is an ideal antenna system for utmost signal stability. Antenna features affect transmission range, stability and anti-interference performance. Therefore, antenna is a vital component in any system installations especially for complicated and demanding RF environment wireless microphones and wireless monitors systems. It greatly improves signal stability and reduces interferences, signal drop-outs caused by polarization problems.
Waterproof
- Ideal for both outdoor and indoor applications.
- Waterproof and weather resistant.
Product Specs
|
Frequency Range |
470MHz~1000MHz |
|
Antenna Gain |
6~8dBi |
|
Polarization |
Circular polarization |
|
3-dB Beam-width |
72° |
|
Booster Gain |
RX connector: 12±1dB; TX/RX connector: 0dB |
|
VSWR |
≦2:1 |
|
Power Consumption |
RX connector: 1120mW (DC 8V); TX/RX connector: 0mW |
|
Impedance |
50Ω |
|
Connector |
TNC Female x2 |
|
Dimensions |
350(W)x350(H)x225(D)mm / 13.8(W)x13.8(H)x8.8(D)” |
|
Weight |
Approx. 1.5kg / 3.3lbs |
|
Note |
Refer to actual product in the event of product discrepancy. |
Reviews
There are no reviews yet.